Digital Velocity Meters - Insertion Paddle Wheel type

Velocity Meter (Models: P-181 or. F-181)

Type of Meter                            : Insertion Paddle Wheel type Velocity Meter

Max. % of Solids                       : 1% of fluid volume, non-abrasive, non-magnetic, <100 micron in dia. & length

Mounting                                   : Field or, Panel

Pipe Line size                            : min. 15 mm up to 500 mm

Pressure drop                            : Less than 0.1 bar

Pulses                                        : 4 Pulses each rotation

Accuracy                                    : +/- 1% of Full Scale if velocity is more than 0.5 m/s

Repeatability                              : +/- 0.5%

Linearity                                     : +/- 2% of full scale             

Enclosure                                  : Weather proof IP 65

Gland                                         : PO7

Fitting material                           : ABS, SS304 or, SS316

Fitting Type                                : Threaded, Flanged, Weld on Adaptor

Velocity range                            : from  0.5 to 5.0 MPS

Max. Operating Temperature     : 60°C for PP Sensor with ABS fittings & 100°C for SS Sensor with SS Fitting

Sensor Cable Length                 : 0.5 mtrs for Field Mounted Meter & 3 mtrs for Panel Mounted Meter                              

Paddle                                       : PVDF (Magnetic up to 100°C & Non Magnetic up to 80°C)

Indicator Housing                      : Polycarbonate

O-rings/Pin                                : Viton / Hastealloy C

Sensor Rod                               : PP or, SS316

Max. Working Pressure             : 7 kg/cm2 for PP Sensor with ABS fittings and

                                                     12 Kg/cm2 for SS Sensor with SS fitting.

Display                                      : 16 X 1 alpha-numeric LCD display with Backlight

Indicator unit dimensions          : 110 mm (H) X 110 mm (W) X 150 mm (D)

Field selectable Units                : MPS

Supply                                       : 230 V AC +/- 15%, 50 Hz

T Fitting                                      : It is compulsory with PP or, SS 316 Flow Sensors (Selection from TYPE OF T-FITTINGS)

Velocity Meter - Insertion Paddle Wheel type F181

Catalogue Manual Enquiry

Flameproof Velocity Meter

Catalogue Enquiry

Type of T-FITTINGS for Insertion Paddle Wheel type Velocity Meter

Catalogue Enquiry