Electromagnetic Type Flow Transmitter   Service : All type of conductive liquids. (minimum conductivity 5 µS/cm) Working Principle : Faraday's law of electromagnetic induction.  Range : 5 to 10000 LPM Pipeline Size : 10 mm up to 350 mm in Full Bore Type and Insertion Type for line size above 350 mm Accuracy : 0.5% of the reading in case of full bore type and 2% of the reading in case of insertion type. Min. Velocity : 0.5 Meter per second Output : 4 to 20 mA Material of Construction : Full Bore Type Insertion Type Flow Pipe SS 304 -
	Sensor SS 316 or special SS 316 or special Flow Meter Housing CS, SS 304 or SS 316 - Insulation Material Hard Rubber, PTFE PTFE Flanges CS or special - Flow pipe SS 304 - Socket - CS - weld on type (1.1/4" BSP-F) Nipple - SS 304 (1.1/4" BSP-M) Isolation Valve - SS 304 Ball Valve Probe Holder with Flange - SS 304 Top Flange and Tie Rods - SS 304 Earth Connection Copper Lug Suitable for 16 mm2 wire Copper Lug Suitable for 16 mm2 wire Flow Indication : Optional Transmitter unit : Integral or Remote Mounted Indicator unit : Integral or Panel Mounted Enclosure : Water Proof (IP 65) or Flameproof Max. Working Temperature : 120 degree C Max. working pressure : 40 bar in full bore type and 15 bar in insertion type. Power Supply : 230 V AC) Applications : Indication of flow rate passing through the pipeline These meters are also termed as Electro Magnetic, Mag Flow or, Magflow Transmitters Enquiry Form Products   Full Bore Type Electromagnetic Flow Meter Insertion Type Electromagnetic Flow Meter     Top   Turbine Type I Electromagnetic Type | Positive Displacement Type | Metal Tube Rota Meter Ultrasonic Type (Through Pipeline) | Ultrasonic Type (Through Open Channel)   Pressure & Vacuum  |  Differential Pressure  |  Temperature  |  Level Flow & Velocity  |  Conductivity & PPM  |  Density Tailor Made Instrumentation |  System Automation